No Payments For 90 Days
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
2018 Powerscreen PT600 Tracked Jaw Crusher The last reported number of hours was 7182. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Tier 4
2018 US EPA Label
Scania GY9XL09.3DAA 444 hp 9.3 L Diesel Engine
Requires Diesel Exhaust Fluid
Terex Powerscreen 3 ft 10 in x 14 ft 1 in Vibratory Grizzly Feeder w/Hydraulic Fold Hopper Wings
Terex Powerscreen 600 32 in x 47 in Jaw Crusher
31 in Wide Fines Discharge Conveyor
48 in Wide End Discharge Conveyor
Terex 28 in x 6 ft Cross Belt Magnet
Radio and Cable Remote Control
20 in Triple Grouser Track Shoes
Feed Hopper: Length @ top: 15’ 10”, Width @ top: 7’ 3”
Jaw, Blow Bar and Anvil Wear Surface: Jaw width and spacing between jaws 32” x 47”, Normal wear. Jaw swing bearings recently replaced.
Crusher Drive System: Belt slipped significantly upon start up. But was fine at idle operation.
Discharge Conveyor Condition: Belt is dry rotted.
Discharge Conveyor Drive Motor: Operational
Hoses: Some hoses have damaged sheaths
Power Travel Drive System: 1 Travel Speed, Travels properly
Limited Function Check: The hydraulic system was operational.
Serial Number / VIN: PIDPT600VOMIA8313
CE Mark: CE Marked
Hour Meter / Odometer: 7182 hrs
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Disconnect Switch: Not operationally checked
Emission Certification Label: US EPA certification label
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check (Engine): The engine started and ran.
Left Grouser Height: 31 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 31 mm
Right Track Bushings: Bushings have not been turned
date of analysis: Feb 11, 2025
Silicon: 3.28 PPM
Tin: 0.58 PPM
Silver: 0 PPM
Aluminum: 1.47 PPM
Chromium: 0.04 PPM
Lead: 0.57 PPM
Copper: 0.42 PPM
Nickel: 1.33 PPM
Iron: 5.32 PPM
Glycol: NEG
Water: NEG
Fuel: <5%
For your convenience, we've included these documents free to download so you can make the best decision.
$16,335
$16,335
284 hours
$169,750
60 hours
$345,750
67 hours
$353,750
432 hours
$563,750
100 hours
$608,750
$1,253,750
View more
$16,335
$16,335
284 hours
$169,750
60 hours
$345,750
67 hours
$353,750
432 hours
$563,750
100 hours
$608,750
$1,253,750
View more