IronClad Assurance
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Price excludes taxes, fees, and shipping
Inspected by IronPlanet. Your purchase is protected by our IronClad Assurance.
Buy now, pay later for well qualified borrowers. Don't let heavy cost slow you down.
2024 John Deere 650 LGP Crawler Dozer The last reported number of hours was 992. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Enclosed Cab
Air Conditioner
Rear View Camera
Trimble Grade Control System
2023 US EPA Label
Requires Diesel Exhaust Fluid
124 in Wide PAT Blade
Drawbar
27.5 in Single Grouser Track Shoes
Engine Power: 131 hp
Displacement: 276 cu in
Operating Weight: 20,624 lbs
Fuel Capacity: 65 gallons
Blade Width: 128 inches
Blade Capacity: 4.1 cu yd
Track Width: 30 inches
Ground Pressure: 5.6 psi
Maximum Forward Speed: 5.6 mph
Maximum Reverse Speed: 6.2 mph
Emissions Rating: Tier 4
Serial Number / VIN: 1T0650PAAPLX03282
Hour Meter / Odometer: 992 hrs
Exterior Lights: Some not operational
Travel Alarm: Operational
Horn: Operational
Seat Belts: Operational
Safety Lock Out/Stop: Operational
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Engine Oil Pressure: The fault indicator shuts off after the engine oil pressure rises.
Warning Lights: Operational
Gauges: Operational
Air Conditioner: Operational
Heater: Not operationally checked
Limited Function Check: The main components are in place and operational as noted.
Engine: 2023 US EPA Label, Requires Diesel Exhaust Fluid
A/C Compressor: Operational
Blow-by (subjective visual observation): No noticeable vapor or pressure
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Transmission: Operational
Limited Function Check (Drivetrain-Track): The drivetrain was operational without a load.
Limited Function Check: The hydraulic system was operational.
Blade Cutting Edge Condition: Reversible-not turned
Blade Trunnions/bushings: Shims remaining
Limited Function Check (dozer): The main components were operational in a limited check.
Left Grouser Height: 44 mm
Left Track Bushings: Bushings have not been turned
Right Grouser Height: 44 mm
Right Track Bushings: Bushings have not been turned
For your convenience, we've included these documents free to download so you can make the best decision.
Price excludes taxes, fees, and shipping
| FINAL SELLING PRICE | TRANSACTION FEE |
|---|---|
| $1 to $25,000 | 10% of the final selling price (min $100) |
| $25,000 to $75,000 | 5% of the final selling price (min $2,500) |
| Above $75,000 | $3,750 |
Speak with an expert. 7 days a week.
Call: (888) 313-1597
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
5868 hours
$200,000
1062 hours
$170,000
3773 hours
$30,000
$135,000
$150,000
5001 hours
$205,000
View more
1063 hours / 228 miles
$104,742
1884 hours / 471 miles
$100,755
5868 hours
$200,000
1062 hours
$170,000
3773 hours
$30,000
$135,000
$150,000
5001 hours
$205,000
View more