Sin pagos durante 90 días
Compre ahora y pague después para prestatarios bien calificados. No permita que los costos elevados lo ralenticen.
Compre ahora y pague después para prestatarios bien calificados. No permita que los costos elevados lo ralenticen.
2018 JCB 3CX 4x4 Backhoe Loader The last reported number of hours was 3176. Hours and condition are captured at the time of listing and are subject to change. Please contact a representative about this piece of equipment for an updated reading.
Open Operator Station
Control Pattern Changer
2018 US EPA Label
87.5 in Loader Bucket
Quick Coupler
17 in Backhoe Digging Bucket
Serial Number / VIN: JCB3CXTEHJ2668079
Hour Meter / Odometer: 3176 hrs
Glass: Front glass cracked
Exterior Lights: Operational
Travel Alarm: Inoperable
Horn: Operational
Seat Belts: Inoperable
Current Safety Manual: No
Current Operator/Maintenance Manual: No
Hydraulic Controls: Controls are twisted, dust boots damaged
Backhoe Control Configuration: Equipped with a control pattern changer
Engine Oil Pressure: The fault indicator shuts off after the engine oil pressure rises.
Warning Lights: Operational
Gauges: Operational
Limited Function Check: The main components are in place and operational as noted.
Engine: 2018 US EPA Label
Blow-by (subjective visual observation): Significant
Starter: Operational
Oil Leaks: No dripping leaks
Fuel Leaks: No dripping leaks
Cooling System Leaks: No dripping leaks
Limited Function Check: The engine started and ran.
Transmission: Operational
Front Axle Oscillating Pin: Heavy movement
Limited Function Check: The drivetrain was operational.
Auxiliary Hydraulic Plumbing: Not operationally checked, Rear
Loader Lift Cylinders: Heavy pin and bushing movement
Bucket Tilt Cylinders: Heavy pin and bushing movement, Both cylinders have oil seal pitch at seal
Boom Swing Cylinders: Dripping leak on the right cylinder, Heavy pin and bushing movement
Boom Lift Cylinder(s): Heavy pin and bushing movement
Stick Cylinder: Heavy pin and bushing movement
Bucket Cylinder: Heavy pin and bushing movement
Limited Function Check: The hydraulic system was operational.
Steering Linkage: Dust boots torn
Master Cylinder: Soft pedal
Limited Function Check - Brakes: The brake system functioned, stopping and holding the machine.
Chassis to Arm Pins: Heavy movement
Tilt Linkage Pins and Bushings: Heavy movement
Limited Function Check: The main chassis components were operational in a limited check.
Boom Condition: Multiple large dents
Swing Tower Pivot: Heavy movement
Boom Base Pin and Bushings: Heavy movement
Pin and Bushings Boom to Stick: Heavy movement
Pin and Bushings Stick to Coupler: Heavy movement
Outriggers: Street pads
Limited Function Check: The main components were operational in a limited check.
Loader Bucket Edge / Shanks: Worn edge, Reversible-turned
Rear Quick Coupler: Manual rear coupler, Operational, Wear at pin connections
Para su comodidad, hemos incluido estos documentos de descarga gratuita para que pueda tomar la mejor decisión.